Wear-resisting Steel Plate

Wear-resistant steel plate has high wear resistance and good impact performance. It can be cut, bent, welded, etc., and can be connected to other structures by welding, plug welding, bolt connection, etc., which saves time in the process of repairing the site. , convenient and other characteristics, widely used in metallurgy, coal, cement, electric power, glass, mining, building materials, brick and other industries, compared with other materials, has a high cost performance

1. Impact resistance: The impact resistance of the wear-resistant plate is very good. In the process of conveying materials, even if there is a very high drop, it will not cause too much damage to the wear-

resistant plate.

2. Heat resistance: Generally, wear-resistant plates below 600 degrees can be used normally, but if we

add some vanadium and molybdenum when making wear-resistant plates, there is no problem with high

temperatures below 800 degrees.

3. Corrosion resistance: Because the wear plate contains a large amount of chromium, the corrosion resistance of the wear plate is excellent, and there is no need to worry about corrosion.

4. Cost-effectiveness: The price of wear-resistant plates is 3 to 4 times that of ordinary steel plates, but

the service life of wear-resistant plates is more than 10 times longer than that of ordinary steel plates,

so its cost-effectiveness is relatively high.

5. Convenient processing: The weld ability of the wear-resistant plate is very strong, and it can also be

easily bent into various shapes, which is very convenient to process.

Wear-resistant steel plate has high wear resistance and good impact performance. It can be cut, bent, welded, etc., and can be connected to other structures by welding, plug welding, bolt connection, etc., which saves time in the process of repairing the site. , convenient and other characteristics, widely used in metallurgy, coal, cement, electric power, glass, mining, building materials, brick and other industries, compared with other materials, has a high cost performance

Parameters of wear resistant steel plate

Manufacturing process of wear resistant steel plate

round tube blank→heating→piercing→heading→annealing→pickling→oiling (copper plating)→multi-pass cold drawing (cold rolling)→blank tube→heat treatment→straightening→hydrostatic test (flaw detection) → Marking → Warehousing.

The rolling method of wear-resistant plate is more complicated than hot rolling (extruded seamless wear-resistant plate). The first three steps of their production process are basically the same. The difference starts from the fourth step. After the round tube blank is emptied, it must be headed and annealed. After annealing, a special acid liquid should be used for pickling. After pickling, apply oil. Then it is followed by multi-pass cold drawing (cold rolling) and then billet tube, special heat treatment. After heat treatment, it is straightened. After straightening, the wear plate is sent to the metal flaw detector (or hydraulic test) by the conveyor belt for internal flaw detection. If there are cracks, air bubbles and other problems inside the wear plate, it will be detected. After the quality inspection of the wear-resistant plate, it must pass strict manual selection. After the quality inspection of the wear-resistant plate, the serial number, specification, production batch number, etc. are sprayed with paint. And lifted into the warehouse by crane.

Quality checking of steel plate and sheet

Packing and Loading

1) 20ft container: 26tons (Can load 5.8M Max)                                    

2) 40ft container: 26tons (Can load 11.8M Max)

3) more than 100tons:can pack by bulk vessel

4) as your requirement.